Product details
Can be used free standing for maximum flexibility at the holiday destination | Reinforced storm tensioning in the entrance area |
Double covered zip fasteners | sewn-in groundsheet |
Product description
Are you travelling with your bus and looking for an awning that gives you maximum flexibility at your holiday destination?
The Liberta-L bus awning is an inflatable and free-standing awning with crossed poles for vehicles with a gutter height of 170 - 210 cm.
Equipment:
It has two entrances, one on the front wall and one on the right side wall, which can also be opened out or rolled up as a sun canopy.
The front entrance also has a mosquito gauze which you can close if necessary to protect yourself from unwanted insects
The clear film windows provide you with a light-flooded awning during the day and can be closed from the inside to make it opaque during the day or at night if required.
In addition, this awning has a power cable feed-through where you no longer have to leave the entrance door open.
A hollow seam for the lock rod is located at the connecting lock for attachment to the vehicle.
The back wall of the awning can be rolled away (by means of a zipper) and includes a windbreak.
Further extras:
-tape-sealed seams
-sewn-in tent bottom
-reinforced storm bracing in the entrance area
-double covered zippers
Note:
The sleeping cabin is not part of the scope of delivery and must be purchased separately.
Features
Type of caravan and mobile home awning | Camper awning |
Sewn-in base | |
Sleeping compartment | - |
Scope of delivery | Tent skin, 3 air hoses, 2 steel setup posts, 1 channel rod, air pump, fastening material, packing bag (100 % polyester) |
Vehicle type Inflatable awning | Camper awning |
Frame | 2 air hoses diameter 10 cm, 1 air hose diameter 8 cm, 2 steel upright poles diameter 16 mm, 1 steel channel rod diameter 16 mm |
Height | 195 - 230 cm |
Pack size (LxWxH) | 75 x 35 x 35 cm |
Installed height (min.-max.) | 170 - 210 cm |
Dimensions (WxD) | 305 x 440 cm |
Material | 100 % polyester, polyurethane coated, seams taped closed Floor: 100 % polyethylene |
Water column | 3000 mm |
Inflatable | |
Colour | black, grey |
Weight | 17,5 kg |
Item Features
Camper
Suitable for camping buses.
Number of persons
Suitable for sleeping and living for 2 persons
inflatable
Frame hoses for inflation.
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Water column 3.000 mm
The water column provides information about the material tightness. To...
read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.