Product details
Rain protected side entrance | Entrance can be rolled up and extended as a sun roof |
firmly sewn-in groundsheet | Roof poles for more stability |
Product description
For vehicles with gutter height of 180 - 220 cm and a total height of 205 cm. Freestanding. The lock dimension and the length of the lock bar for attachment to the roof of the vehicle is 240 cm.
Material:
100 % polyester, polyurethane coated, seams tape-sealed.
Floor: 100 % polyethylene. Water column: 3000 mm.
Poles:
3 aluminum poles Ø 11 mm, 3 roof poles aluminum Ø 16 mm / 19 mm, 1 steel lock pole Ø 16 mm, 1 fiberglass pole 9.5 mm.
Front wall:
- Entrance with mosquito gauze door closable by means of zipper
- Entrance can be opened as sun roof
- Clear film window (can be closed from inside to make it opaque)
Side walls:
- left side wall with clear film window (can be closed from inside to make it opaque) and mosquito gauze (can be closed from outside)
- right side with rain protected entrance and mosquito gauze
Back wall:
- laterally rollable (by means of zipper), incl. windbreak
- Connecting sluice with hollow seam for sluice pole
General equipment:
- tape sealed seams
- double covered zippers
- firmly sewn-in tent floor
- Roof poles for more stability
Features
Type of caravan and mobile home awning | Camper awning |
Inflatable | - |
Sewn-in base | |
Scope of delivery | tent skin, frame, fastening materials ,packing bag. |
Sleeping compartment | - |
Frame | aluminium frame, steel frame |
Weight | 10,3 kg |
Material | 100% polyester |
Water column | 3000 mm |
Installed height (min.-max.) | 180 - 220 cm |
Dimensions (WxD) | 350 x 315 cm |
Pack size (LxWxH) | 73 x 24 x 24 cm |
Item Features
Double covered zippers
Provide additional wind and rain protection at entrances and windows.
Sewn in bottom
Floor is firmly connected to the flysheet. Best possible comfort and protection...
read more
Floor is firmly connected to the flysheet. Best possible comfort and protection against draughts, insects, dirt and moisture. Also makes it easier to pitch the tent.
Lightweight fiberglass frame
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments...
read more
Fiberglass rods are made of epoxy resin and fiberglass. The individual segments are connected by a rubber band, thus facilitating assembly Advantage: weight saving.
Taped seams
An adhesive tape provides additional protection for all seams and prevents the...
read more
An adhesive tape provides additional protection for all seams and prevents the penetration of moisture.
Mosquitogaze
Protection from insects and other small animals. Also serves for air circulation.
Power cable entry (E-Port)
Enables safe power supply with firmly sewn-in bottom. Can be closed by means of a zipper
Water column 3.000 mm
The water column provides information about the material tightness. To...
read more
The water column provides information about the material tightness. To determine the millimetre value, 10 cm of fabric is stretched under a measuring cylinder and the cylinder is filled with water from above. The limit value at which water droplets press through the material is the maximum water column. In Germany, a tent outer material is considered waterproof from 1500 mm.
Camper
Suitable for camping buses.