Dino Power Pack Battery Charger 12 V / 5 A

Fully automatic 8-step battery charger with 5A charging current for 12V starter batteries

Just select the charging process by pressing the "Mode" button and the microprocessor-controlled device does everything fully automatically, from reviving empty batteries to completing the charging cycle and trickle charging full batteries. With the Dino power pack, batteries can also be charged directly in the vehicle. No time-consuming removal of the vehicle batteries is necessary.

The Dino Power Pack is suitable for all common 12V lead acid batteries (Normal,Start/Stop,AGM,Gel,CaCa,Maintenance Free,Open). Recommended battery capacities: 10Ah to 120 Ah. Trickle charge up to 200 Ah. Four charging programs are available (Auto,Motorcycle,Frost,AGM). The Dino battery charger has three special charging modes. The Refresh mode extends the performance and lifetime of the vehicle battery. Frost mode adapts the charging process to low temperatures. The AGM mode adapts the charging process specifically for AGM batteries. Fully automatic charging takes place in eight charging steps. (1. break up sulphation, 2. soft start, 3. charge up to 80%, 4. charge up to 95%, 5. capacity test, 6. refresh 100%, 7. trickle charge 100%, 8. pulse charge 95-100%). Two cables with quick connectors (continuous charging cable & charging cable with tongs) are included with the jet-proof and dust-proof device.

Highlights:

• 8-charge steps for long battery lifePulse charging for maximum battery life
• Revives deeply discharged vehicle batteries
• Battery refresh function4 charging programs
• Trickle charge up to 200AhSulphation break-up
• Soft start functionBattery capacity test
• Multiple overload protection
• Suitable for continuous charging
• For all common 12V lead acid batteries 10Ah-120Ah
• Microprocessor controlled
• Absorption: 14.4V, 14.7V, 15.8V
• Trickle charge up to 200 Ah
• Recommended battery capacities: 10 Ah to 120 Ah
• Charging current maximum 5.0 A
• Cable length continuous charge cable: 1.55 m
• Cable length clamp cable: 1.55 m
• Cable length mains cable: 1.5 m
• Cable with quick connectors
• Water jet protected from any angle (IP65)

Technical specifications:

• For: 12V lead acid batteries,Normal, Start/Stop,AGM,Gel,CaCa,Maintenance free,Open
• Recommended battery capacities: 10 Ah-120 Ah, trickle charge up to 200 Ah
• Specification: 12V 5A, microprocessor controlled
• Charging current: Maximum 5.0A
• Charging programs: 4 (Car, Motorcycle, AGM/Frost, Refresh)
• Charging voltage: Car 14.4V, Motorcycle 14.4V, AGM: 14.7V, Refresh: 15.8V
• Charging steps: 8 (1. break up sulphation, 2. soft start, 3. charge up to 80%, 4. charge up to 95%, 5. capacity test, 6. refresh 100%, 7. trickle charge 100%, 8. pulse charge 95-100%)
• Back discharge current: < 5mA
• Current ripple: < 4%
• Working temperature: -10°C to +40°C
• Power supply: 220-240 V, 50-60 Hz
• Current consumption: Maximum 0.9 A / 230 V
• Protection class: IP65 protection against jet water (nozzle) from any angle, dust-tight.
• Protection: Multiple electrical protection against overload (reverse polarity protection, overheating protection, overload protection, short circuit protection)
• Mains plug type: Plug type C (CEE 7/16) "Euro plug".

Dimensions & Weights

• Cable length charging cable with clamps: 1.55 meters
• Cable length charging cable permanent connection: 1.55 meters
• Cable length with mains plug: 1.5 meters (The distance between socket & vehicle battery should not exceed 3.1 meters)
• Weight device including cable: 521g
• Charger dimensions: 21cm(L) X 7.5cm(W) X 5cm(H)

Special charging functions:

Refresh mode: refresh function increases performance and prolongs battery life.

AGM/Frost Mode: Frost & AGM function for adjusted charging at low temperature below 4°C or for AGM batteries.

Step 1 (Break Up Sulphation):
Detects batteries affected by sulphate deposits and removes this deposit using pulsating current and voltage for restoration of optimum battery capacity.

Step 2 (Soft-Start):
Checks the battery for chargeability and starts charging only if the result is positive. This prevents damage.

Step 3 (Charging up to 80%):
Charges the battery after a successful test with maximum current up to a charge level of approx. 80%.

Step 4 (Charging up to 95%):
Charges with decreasing current up to a charge of 95%.

Step 5 (Capacity Test):
Teststhe battery to maintain charge. Indicates when the battery cannot maintain voltage. Defective batteries are indicated by the red indicator LED and should be replaced.

Step 6 (Refresh 100%):
Select Refresh by pressing the Mode button to add this mode to the automatic sequence. The Refresh function causes a controlled outgassing of the battery acid. This provides a full charge and increases battery life and performance.

Step 7 (trickle charge):
Maintains charge at constant battery voltage and low charge current.

Step 8 (Pulse Charge 95-100%):
When the voltage drops below 95%, pulses of charge are used to restore 100% of the charge and prevent re-sulphation.

Scope of delivery:

• Charger (protection class IP65)
• Charging cable with clamps (protection class IP65)
• Charging cable for fixed installation (protection class IP65)
• Instruction manual (German language)