Dino Power Pack Battery Trickle Charger 6 V /12 V 750 mA

Fully automatic battery maintenance charger with 750mAh charging current for 6V & 12V starter batteries

This innovative charge maintainer is equipped with the latest battery charger technology and charges batteries in such a way that they always remain at a constantly high level. This serves to maintain the highest possible battery capacity and a steady availability of sufficient voltage to start your vehicle. The unit automatically determines the battery voltage, state of charge and the need to maintain the charge and starts the trickle charge process as soon as the battery voltage drops below 13V at 12V or 6.5V at 6V.

The device is suitable to remain permanently on your battery, e.g. over the winter, as it automatically switches the charging process on and off.Protective devices have been incorporated against possible overloads due to reverse polarity, excessive current due to short circuits, temperature due to excessive continuous load, etc.. During trickle charging, voltage surges are applied to the charge in the event of a voltage drop.This specifically counteracts harmful sulphation, i.e. a reduction in capacity and deterioration in high-current behaviour.

The connection cable for fixed installation on the vehicle battery, which is also included, makes operation much easier. Currently, the poles of batteries can only be uncovered with considerable time and often only with the use of tools due to cold protection and installation position. Once the fixed connection cable is installed, connecting the charger is a matter of seconds.

This device can be used with all 6V and 12V batteries up to a capacity of 2-240Ah in trickle charge mode.It is suitable for all types of modern lead acid batteries such as AGM,CaCa,Normal,Maintenance Free,Open or Gel batteries.

Highlights:

• IP65 jet water protection(nozzle)from any angle & dust proof
• Automatic voltage detection (6/12V)
• Charging current 750mAh
• For battery capacities up to 2-240Ah
• Fully automatic charging
• For all common 6/12V lead acid batteries
• Multiple protection against overload
• 2 cables included (pliers, continuous charging cable)

Technical specifications:

• Specification: 6V and 12V max. 750 mA
• Charging current: 750mAh max
• Power supply: 100-240 V, 50 Hz
• Charging voltage: Normal: 6V or 12V
• Voltage selection: Automatic
• Recommended battery capacity: 2-240Ah
• Charger type: Trickle charger (not fullw. charger)
• Battery type: 6/12V lead acid battery (Normal,AGM,Gel,CaCa,Maintenance free,Open)
• Working temperature: -10°C to +40°C
• Protection class: IP65- IP65 jet-proof from any angle (nozzle) and dustproof
• Fuse protection: Multiple electrical protection against overload
• Mains plug type: Plug type C (CEE 7/16) "Euro plug".

Dimensions & Weights

• Cable length charging cable with tongs: 1.90 meters
• Cable length charging cable permanent connection: 1.90 meters
• Cable length with mains plug: 0.5 meter
• Total length: 2.50 meters
• Weight device including cable: approx. 140g
• Dimensions charger: 10cm(L) X 5.5cm(W) X 3.5cm(H)

Scope of Delivery:

• Charger
• Charging cable with pliers
• Charging cable for fixed mounting
• Instruction manual (German language)