Moonbox Camping Box Nature KombiVan Type 111

Determine the destination of your journey yourself!

Within a minute, the Moonbox transforms the vehicle into a mini camper - no matter when, no matter where.
The Moonbox can be easily folded up during the journey. On arrival, it can be transformed into a pull-out double bed with a comfortable mattress for a good night's sleep - or into a lounge with table, water tank and fully functional kitchen.
Always ready for immediate use.

Our Moonbox is manufactured directly in Europe in our in-house production facility. The box is made of 100% natural birch wood, the screws & fastenings are made of metal. You won't find any plastic on our box!

The Moonbox camping box with table type 115 is suitable for vehicles where the narrowest point (between the rear wheel arches) is at least 115 cm wide and the floor length is at least 130 cm, measured from the trunk door to the front.

The set includes 4 feet (15 mm high) with which the box can be adjusted if the seating group protrudes above the floor.

If protruding elements are higher than 15 mm, please let us know when placing your order - in this case we will send an additional set.

Set composition:

1. Base box with dimensions: 115x66x33cm
2. Bed frame with the dimensions 115x200cm after unfolding
3. One kitchen drawer
4. Table top with dimensions:
5. One easy to assemble table legs
6. The support frame (used when we do not occupy the second row of seats)

The set also includes:
- Two-burner stove
- Operation with standard cartridges with a capacity of 227 g - this allows the burner to be used continuously for about 2-3 hours
- Each burner has an automatic ignition device
- Smooth regulation of the flame
- Portable (the gas stove can be used outside the camping box)
- ATTENTION: When the stove is not in use, the burners must be disconnected from the cartridges.

The cartridges can be removed from the gas stove - there are two independent disconnect switches.

- 2 cartridges 227g
- 4 gray mattresses with the dimensions:
- The thickness of the mattresses is 10cm (dimensions after unfolding 115x200 cm)
- 4 removable mattress covers
- The fabric is easy to keep clean
- Limited absorption of liquids
- Resistant to abrasion and sunlight
- Recommended cleaning method: Clean only with mild upholstery care products. Do not wet wash.
- Do not iron. Do not bleach.
- Water tank with 20l capacity
- Water tap with flow regulation
- Total weight: approx. 125 kg

Compatible vehicles:
Citroen Berlingo I up to 2009, Citroen Berlingo II from 2008,
Citroen Berlingo III from 2018, Citroen Berlingo III XL from 2018 (ATTENTION: the 118cm are too wide for newer Berlingo models from 2019),
Peugeot Partner Origin up to 2009, Peugeot Partner Tepee from 2008,
Peugeot Rifter from 2018, Peugeot Rifter Long from 2018, Fiat Doblo I until 2010,
Fiat Doblo II from 2010, Fiat Doblo II Long from 2010, Mercedes Citan Long from 2013
Mercedes Citan Extra-Long from 2013,
Mercedes Vaneo from 2002 onwards (an additional elevation is required when the rear seat row is folded down)

Installation and removal
Installing and removing the Moonbox is child's play and can be done within 5 minutes. It can be placed and secured in your vehicle when assembled.

1. spread out the support boards in the vehicle (if the car has a rail system or the floor is uneven)
2. place the base box in the back of the car. (This step is best carried out with a helper)
3. place the smaller boxes in such a way that the drill holes on the front side coincide with the drill holes in the base box
4. connect the base and secondary boxes with the screws supplied and tighten them firmly.
5 Place the table top between the side boxes, depending on the model.
6. place the sleeping pads, water canister & gas cooker on or in the box.
7. finished - your Moonbox is now ready for use.

Important notes:
- our products are not components of the vehicle.
- it is expressly pointed out that our products are cargo, the proper securing of which is not our responsibility.
- securing of our products by the driver of the vehicle is necessary and must be carried out in accordance with the conditions of the vehicle (e.g. using lashing straps).