Oyster Connect Global LTE/Wifi External Aerial with Control Unit and Installation Kit

Conveniently on the move in the mobile home network

Whether smartphone, tablet, laptop or smart TV - once logged into the home network, all devices remain connected to the Internet and nothing stands in the way of safe, fast surfing.

When traveling, however, campers often have to take a back seat when it comes to the Internet: Unstable reception or overloaded WiFi/LTE networks at campsites are not uncommon. Ten Haaft offers a solution for travelers who need reliable reception for work while on the road or who don't want to do without a functioning Internet connection while on vacation.
Mobile Internet like at home - even while traveling.

With the Oyster Connect, the engineers of the premium manufacturer of mobile satellite technology from Baden-Württemberg, Germany, have developed a special antenna system for sophisticated requirements: the mobile hotspot ensures a stable signal - even while driving.

You can surf in your camper, camping bus or caravan in complete relaxation - and also enjoy all the benefits of a "mobile home network".

The connection is maintained regardless of location, regardless of which network the external signal comes from - the registered end devices connect to their own hotspot completely automatically.

At the top - Oyster Connect

One of the main advantages of this special antenna system with its direct RF connection to the transmit and receive modules is that the mounting location of the outdoor unit is at the top of the vehicle roof, enabling maximum transmit and receive power.

The Oyster Connect is thus far superior to classic smartphone reception and products currently available on the market, since the attenuation of the signals by the vehicle structure (thermal insulation glazing / metal bodywork) and the length of the antenna cable no longer play a role.

Outdoor Unit and Indoor Unit in perfect harmony

The Oyster Connect - Outdoor Unit
The highlight is that the Outdoor Unit has both an LTE and a Dual Band WiFi module built in.

Supports LTE bands (global reception) B1/3/7/8/20/28/38/40/41 from 698 MHz to 3800 MHz)

The Oyster Connect Global supports the LTE bands worldwide.

Each of these modules has a directly connected antenna system that has been specially tuned for this application. This ensures a greater range and, if the LTE network is overloaded by too many users, it can reach not only the next radio mast, but also the one after that. In the Wi-Fi sector, the MIMO system with 4 antennas ensures stable data throughput in both the 2.4 GHz and 5 GHz bands. Behind MIMO is the ability to send and receive a data stream via multiple antennas through intelligent data processing (Multiple Input Multiple Output).

The LTE function is based on an ALL-band antenna in diversity technology. It supports all European LTE bands/providers and provides maximum transmit and receive performance without antenna alignment.

The information received in front of the Outdoor Unit is transmitted lossless to the Indoor Unit by means of a data cable.

The Oyster Connect - Indoor Unit

The second component of the Oyster Connect system, the Indoor Unit, is located in the vehicle interior and serves as a WiFi access point, just like you know it from home. The Indoor Unit is a fully-fledged, private access point with integrated 2.4 and 5 GHz WiFi antennas (2x2 MIMO technology). Both bands are in parallel operation - so you can connect several mobile devices simultaneously, even on different bands, with the highest possible data transfer.

With the Indoor Unit, the desired end devices, such as smartphone, tablet, laptop or smart TV only need to be connected once. It also has a LAN port and can therefore also set up a private wired LAN network. The Outdoor Unit has an aerodynamic design: With a height of just twelve centimeters and a length of about 40 centimeters, it fits on any recreational vehicle and impresses as a 1.5-kilogram lightweight.

When it comes to installation, the ten Haaft engineers have remained true to their tried-and-tested system: A mounting plate is glued to the roof and the antenna housing is mounted with four screws. The inserted SIM card can be replaced at any time if necessary, for example with a country-specific SIM card.

A roof grommet and the four-meter data cable allow flexible installation on any vehicle.

Settings of the Oyster Connect - Outdoor Unit:

WiFi hotspot selection and configuration:

• Supports 2.4 and 5 GHz WiFi networks
• Setting of automatic or manual switch to LTE network in case of WiFi unavailability
• Setting the LTE access data (APN)
• Saving or deactivating the SIM pin

Settings of the Oyster Connect Indoor Unit:

Configuration of the private "home network"

• Provides 2.4 and 5 GHz WiFi access points
• System updates
• Provides an RJ - 45 connector for a private wired LAN

The advantages at a glance

• Mounting of the transmitter and receiver unit on top of the vehicle roof prevents loss of attenuation
• Powerful WiFi antennas (2x2 MIMO) and LTE - diversity antennas
• One-time and easy setup of the "mobile home network
• Free selectability 2.4 GHz / 5 GHz in WiFi network for both indoor unit and outdoor unit
• Supports European LTE bands B1/3/7/8/20/28/38/40/41
• Private LAN network enables WiFi network relief and not every smart TV is WiFi capable
• Aerodynamic design
• Easy installation and space-saving design
• Weatherproof
• Comfortable operation
• 3 years warranty

Technical data:

• Operating voltage: 12/24V DC (voltage range 9-32V DC)
• Operating current consumption: <1 A
• Power consumption in operation: max.10 W
• Standby power consumption: < 0.1 W
• maximum permissible speed: 180 km/h
• Weight: Outdoor Unit with mounting plate approx. 1500 g
• Indoor Unit approx. 250 g
• Mounting material approx. 230 g
• Dimensions (W x H x D) : Outdoor Unit: 40,5 x 12 x 29,2 cm
• Dimensions (W x H x D): Indoor Unit: 17.5 x 3 x 10.6 cm

Scope of delivery:

• Oyster Connect - Outdoor Unit
• Oyster Connect - Indoor Unit
• Roof duct and data cable 4m
• Power cable Oyster Connect - Indoor Unit
• Mounting plate

SIM card Note:
For LTE operation, a SIM card is required, which is not included in the scope of delivery. The connection costs incurred here as well as the Internet parameters (download / upload, int. roaming) depend on the respective network operator and must be checked by the customer.