Name: Votronic VCC 1212-30 charge converter
Brand: Votronic
SKU: 414997
Price: 163 GBP
Availability: InStock

Votronic VCC 1212-30 charge converter

£ 163.00

Prices incl. VAT

Item number: 414997

Availability: Available in 10-14 working days

Added

Our Customer Service

Mon - Fri: 9am - 4pm

WE'RE THERE FOR YOU

Contact Form

Send us your question regarding this product!

Secure payment with SSL encryption

Free Returns

Product details

Fully automatic operation	Parallel and buffer operation
Surveillance free charge	Charging cable compensation

Product description

Fully automatic battery charge converter for special vehicles, high-end motorhomes, boats

Details

High charging power even for short driving distances or full charge for longer driving.
Increases/decreases the voltage to the necessary level to precisely charge the on-board battery with the optimal charging characteristic for it.
Fully compensates for line losses and alternator voltage fluctuations, such as those that constantly occur to a considerable extent in Euro 6 vehicles (intelligent alternators).
Compact design, low weight (high-frequency switch mode technology) and strongly dimensioned power components for safe operation.
Significantly improved energy balance of the on-board battery without intervention in the starter circuit
Powered 12 V consumers are protected against overvoltage and voltage fluctuations.
The charging voltage is free of peaks and regulated in such a way that overcharging of the batteries is excluded.
Fully automatic operation: the device is constantly connected to the batteries and is automatically activated by the running alternator of the vehicle. When the engine is not running, the batteries are not discharged.
Parallel and buffer operation: in case of simultaneous consumption, the battery continues to be charged or kept full. The device automatically calculates and monitors the adjustment of the charging times.
monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short-circuit, malfunction and battery back-discharge by electronic cut-off up to complete disconnection of device and battery.
Built-in on-board filter: Problem-free parallel operation with other charging sources (EBL, chargers, motor and fuel generators, solar systems) on one battery.
Charging cable compensation: Voltage losses on the charging cables are automatically compensated.
Connection for battery temperature sensor (included): For lead-acid batteries (acid, gel, AGM), the charging voltage is automatically adapted to the battery temperature, resulting in better full charging of the weaker battery in cold weather, and avoiding unnecessary battery gassing in summer temperatures.
LiFePO4 batteries: Battery protection at high and especially at low temperatures < 0°C.
Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, -gel, -AGM) battery up to 8 V, then powerful support of the battery with consumers possibly still switched on.

Loading programs

1 "Gel": Charging program for gel batteries, characteristic IU1oU2: Tuned to sealed, gas-tight gel/dryfit batteries with fixed electrolyte, which generally require a higher charging voltage level and longer U1 holding times to achieve short charging times with particularly high capacity storage and to avoid long-term battery "starvation".
2 "AGM": Charging program for AGM/fleece batteries, characteristic IU1oU2: Intended for charging sealed, gas-tight AGM (Absorbent-Glass-Mat) batteries in lead-fleece technology, which require a particularly high U1 level with coordinated holding times for full charging and then a moderate U2 level for charge maintenance (plate and round cell technology).
4 "UNIVERSAL": Charging program for lead-acid/wet/AGM batteries, characteristic IU1oU2: Universal program for charging and charge retention of acid batteries in vehicles (mixed mobile/stationary). With medium U1 level, still provides short charge times, good charge factor and good acid mixing for open and closed, low-maintenance, maintenance-free standard, traction, lighting, solar and heavy duty batteries, as well as AGM batteries with normal U1 level.
Li "LiFePO4": Charging program for lithium batteries, characteristic IU1oU2: Charging program adapted to lithium LiFePO4 batteries with own BMS and prescribed or built-in protective circuit.

Technical data

Input from vehicle starter battery "+ IN Start".
Vehicle starter battery Nominal voltage: 12 V
Battery capacity (-size), minimum recommended: 50 Ah
Input voltage range (EURO 6 +), D+ controlled: 10.5 - 16.5 V
Input overvoltage cut-off (EURO 6 +), max.: 16.5 V
Power consumption max.: 490 W
Current consumption (at lowest input voltage) max.: 0.05 A - 39 A
Activation control input "D+", from D+, terminal 15, ignition: 8 - 17 V
Charge output to on-board supply battery "+ OUT on-board".
Charge/buffer/load current, regulated IU1oU2, lead, LiFePO: 0 A - 30 A (0 A - 20 A *)
Lead-acid, -gel, -AGM battery Rated voltage: 12 V
Capacity (battery size), recommended / up to: 60-200 / 260 Ah
lead charge programs stored in memory: 3
Pre-charge current (battery deep discharge < 8V), max: 15 A (10 A *)
Safety charging voltage in case of battery overtemperature: 12.80 V
LiFePO4 battery rated voltage: 12 V (12.8 -13.3 V)
Capacity (battery size), recommended / up to: 60-200 / 260 Ah
liFePO4 charging programs stored in memory: 1
Safety charging voltage in case of battery overtemperature: 12.80 V
Reverse charge branch, charge/charge maintenance for the 12 V START battery
from the BORD battery (e.g. when charging the BORD battery from the mains): 12 V / 0-1 A
Active for lead-acid, -gel, -AGM BORD battery voltage: On: > 13.1 V, Off: < 13.0 V
Active with LiFePO4 BORD battery voltage: On: > 13.5 V, Off: < 13.4 V
"T T" input for battery temperature sensor "Bord": yes
EBL START In, EVS measurement input: yes
Quiescent current, StandBy: 3 ... 7 mA
Charge timer: 3-fold
Voltage ripple: < 30 mV rms
Charge voltage limit "+OUT Bord" (protection of consumers): 15.00 V
External overvoltage cut-off "+OUT Bord" (20 sec): 15.50 V
Short circuit/back discharge/safety protection: yes
Device mounting position: any
Temperature range: -20 to 45° C
Speed-controlled, temperature-controlled fan: yes
Gradual reduction of charging power in case of overtemperature: yes
Safety shutdown in case of overheating: yes
Dimensions (L x W x H) incl. mounting flanges and clamps: 146 x 67 x 40 mm
Ambient conditions, humidity: max. 95 % room humidity, non-condensing